Pro Scooter Clamps

There are two main types of pro scooter clamps: SCS and Standard clamps. Our SCS Pro scooter clamps will help keep your bars clamped down on your pro scooter and also add some height to your bars! Standard
pro scooter clamps are the most common form of clamps and come in
different variations like our DUBL and Triple pro scooter clamps!

What pro scooter clamp you need depends on what compression system you are using. For example, if you are using HIC or TCS,
and have a slit cut into your bars, then you will need one of our
standard clamps such as the DUBL, Triple and Standard clamps. If you are
running SCS then you will need to use an SCS pro scooter clamp. Keep in
mind that when using SCS it will raise the height of your bars by about
an inch.

A pro scooter clamp secures your bars to your fork using compression and
by tightening the bolts on the side of the clamp. For standard clamps,
your clamp will slide on your bars and then your bars will slide over
your HIC shim or TCS system which is over the fork. Your bars will have a
slit cut into them so the bars can compress and sit tightly around the
compression system. For SCS, your bars will slide into one side of the
clamp while the other side bolts into the top of your pro scooter fork.
If you want a step by step video of how to install your pro scooter
clamp and bars check out our how to videos here https://www.luckyscooters.com/pages/lucky-how-to-videos